Product Summary The NX-5000 Series offers unsurpassed interoperability for a wide variety of users as it supports
three digital CAIs - NXDN, DMR and P25 (Phase 1 & 2) - plus FM analog in a single radio.
Best of all, a desired CAI can be selected at will, giving you the freedom to migrate at your own
pace - whether you are intent on going fully digital, undecided about which digital system to
pick, or just wanting to maintain both digital and analog for a while. A NX-5000 radio can
simultaneously support two digital protocols plus analog, offering the following combinations:
FM/DMR/NXDN, FM/NXDN/P25, and FM/DMR/P25.
Features:
- Multi-Digital operation in NXDN, DMR, and P25 (Phase 1 & 2)
- Any combination of two digital protocols may be selected from NXDN, DMR, and P25
- Mixed Digital & FM Analog Operation allows intelligent migration in mixed sites and easy migration with digital radios in other sites
- Large, Color 1.74" (240 x 180 pixels) Transflective TFT Display for better interface even in direct sunlight and with use of polarized sunglasses
- Easy to follow GUI for at-a-glance operational status and Multi-line Text to convey information
- 4-way Directional-pad (D-pad) and 2-Position Lever Switch for intuitive control
- Built-In GPS Receiver/Antenna for effective fleet management
- Bluetooth® Module Built-in for hands-free operation
- Renowned KENWOOD Audio Quality achieved with Active Noise Reduction (ANR) that utilizes built-in DSP with two microphones for suppression of ambient noise
- Built-in 56-bit DES Encryption
- Optional 256-bit AES Encryption
- Built-in Motion Sensor for man down detection
- microSD/microSDHC Up to 2GB/32GB Memory Card Slot for increased memory capacity for "Voice & Data""
- IP67/68 and MIL-STD-810 C/D/E/F/G
- 6 W (136-174 MHz ) Models
- 5 W (380-470, 450-520 MHz) Models
- 3 W (700/800 MHz) Models
- Full Key Models (w/numeric keypad) and Standard Key Models (w/o numeric keypad)
- Maximum of 1024 CH, 128 Zones (4000 Ch. Opt)
- 1 W Speaker Audio
| Product Summary One NEXEDGE radio, multiple protocols*: the NX-5700HB (110 W) / NX-5800HB (100W) mobile transceivers support NXDN and P25 (Phase 1 & 2) digital protocols, plus FM analog for mixed operation. This high-power RF deck - equipped with Bluetooth®, GPS and a memory card slot - requires one of several optional remote control heads, all of which offer an intuitive controls for easy operation. The versatile NX-5700HB/5800HB can be combined with other RF decks and multiple remote control heads to create a radio system that is tailored to your interoperability requirements.
*Note that, unlike NEXEDGE 50W-class models, the NX-5700HB/5800HB mobile series does not support DMR. Features: - Multi-digital Operation in NXDN and P25 (Phase 1 & 2) protocols
- Multi RF Deck with Low Band / VHF / UHF / 700 & 800 MHz combination
- Mixed Digital & FM Analog Operation allows gradual migration in mixed sites and easy migration with digital radios in other sites
- Variety of Optional Remote Control Heads (Note:NX-5700HB/5800HB is remote operation only)
- - Dual Remote Control Head and Multi-band (Multi RF deck) capable options
- - Easy-to-follow controls and Information Conveying Multi-line Text are built into each control head
- Maximum of 4,000 CH/Radio capacity, 512 CH/Zone, 128 Zones
- Built-In GPS Receiver for effective fleet management
- Built-in Bluetooth 4.0 for hands-free operation
- USB Micro Terminal (up to 12 Mbps)
- - PC Programming & Internal microSD Access (Requires USB driver for PC)
- Renowned KENWOOD Audio Quality can be achieved with Active Noise
- Reduction that utilizes built-in DSP for suppression of ambient noise
- Built-in 56-bit DES encryption
- Optional 256-bit AES encryption
- microSD/microSDHC (Up to 2GB/32GB) Memory Card Slot for increased
- memory capacity for "Voice & Data"
- RF output power: VHF: 110 W to 25W / UHF: 100 W to 25 W
- DB-25 & Molex 9-pin Accessory Connector
- AMBE+2™ Enhanced Vocoder
- 12 W Audio Output
- IP54/55 and MIL-STD-810 C/D/E/F/G
|
(940) 894-2181
(940) 894-2181
